Re: Super A timing followup

Posted by Jim Becker on February 18, 2011 at 07:00:37 from (173.57.163.253):

In Reply to: Super A timing followup posted by CNKS on February 16, 2011 at 17:56:09:

I may be wrong on this, but I believe the correct marks should be in position next to the governor gear to do the alignment when the engine is turned to #1 TDC. Set your engine at #1 TDC . Whether the marks are one each on adjacent teeth or close together between two teeth, just use them.

In any case, after installing the governor, the distributor drive slot should be about 35 degrees off of horizontal. (oriented 2 - 8 o'clock when viewed from the distributor end). If you have that orientation at TDC, you are in business.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]