Posted by 47H on June 06, 2010 at 06:33:14 from (76.164.179.49):
I appreciate all the info you guys have given me; I assure you I am no electrician. At present I have the front and rear lights wired to the switch. I have a fused wired from the ammeter to the switch. Does it matter which post I use on the ammeter? Currently using the one on the right as viewed from the back. With the switch in the L position and tractor running the ammeter reads 0. One click to H and the front lights come on dim and the ammeter shows discharge. IS THIS CORRECT? I thought at the H position the ammeter would show High charge and the lights would remain off. Another click to D should turn the lights on dim but they go from dim to BRIGHT. Another click to B the front lights stay Bright and the rear light comes on. Ammeter showing discharge at all times any lights are on. Seems like something is still wrong. Should the lights come on in three postions of the switch H D and B? What happened to High charge? Should I replace the four position light switch with a three position switch? I hope I can leave you guys alone after this, I'm sure you are tired of dealing with my problem. I need straight forward answers as I am no good at reading schematics or understanding alot of the terminology. Please note that I ask several different questions in this post. I am a novice at best. Thank you very much for your time and patience!!!!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
