Posted by Shawn in West MO on February 08, 2010 at 10:19:34 from (144.73.127.75):
I purchased a 560 here a couple of months ago and an trying to get some of the bugs worked out. The hydraulic pump squalls for about 0.5 seconds whenever you let go of the hydraulic handle after actuating the cylinder. It is quiet as long as the handle is fully actuated or not actuated at all, but if it is only pulled slightly (like to move a cyclinder slowly) the pump squalls and it pulls the engine down. I thought maybe the unloading valve was sticking so I took it apart and cleaned it up. When in the valve I found two washers under the spring, which I assume was a previous owner"s way of increasing pressure. I removed them with hopes this would fix the problem, but it didn"t help. Also, I don"t think it would affect anything, but the fast hitch has been removed. All of the mechanism to the tel-a-depth is still on the side of the tractor, but is not hooked to anything and the linkage from the handle is also unhooked. It seems this shouldn"t affect anything since both sides are unhooked and due to the differential gears the spool cannot be moved with both sides unhooked. I thought maybe it would be worth adding. Any idea what could be causing the noise?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.