Farmall & IHC Tractors Discussion Board |
More With H Steering
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 1PWRFULH on July 18, 2001 at 09:47:44 from (63.23.233.150):
For those of you who didnt read my first post I had a really bad problem with the front wheels wobbling on the H in 5th gear. The worm and sector gear doesnt have very much play in it so I jacked the front of the tractor up today and pushed the front wheels back and forth and noticed little movement. What I found was a little different. You probably dont remember but I had a post awhile back about when I had something heavy on the 3 pt and whenever I let the clutch up or hit the slightest hole I would hear a loud BAM BAM coming from the front. Well I noticed that while I was jacking the tractor would go up about a 1/2 inch before the front wheels even thought about going up. I let the jack down and it made the same noise. Jacked it up again to observe more and the whole tractor moves up probably a little more than a 1/2 inch before the front bolster wants to come up. Could it be a bushing or bearing that is bad? Thanks in advance!!! I think I will try to work on it friday. RC
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|