Farmall & IHC Tractors Discussion Board |
Dumb question on voltage reads on ignition system
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gene on March 05, 2001 at 17:47:05 from (64.12.101.151):
I just about overhauled my carburator to death because of fouling of plugs and gas rich fume exhaust and while trouble shooting the "fuel" problem, I read the voltage on the coil (this is all on a IH 464 12-volt system). The battery read 12.05 volts and the reading on the coil terminal was 7.54 volts!! I disconnected the lead from the coil and it then read 11.79 volts (coming to the coil from the battery). I assume that the points were closed at the time, causing that kind of drop? The spark coming to the plugs looked pretty puny and that is why I started looking at the electrical side of things. The plugs constantly foul and I thought I was addressing a fuel problem. Can someone explain to my dumb butt as to what I am seeing with these voltage readings. I checked them twice and that is what they are. What am I dealing with here in addition to my illiteracy? Thanks.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|