Its because the metal is more brittle.Farm machinery is also like that from the late 1970s or early 1980s.High carbon steel I seem to remember.
Also welders have told me about the cracking and grinding and welding it back and Ive done it too.Also the higher strength rod is not going to help if its also low hydrogen,it will crack just as bad.
I have welded a lot on trailers and truck frames and farm machinery and stuff and you can weld it with 7018,but MIG works better.For some reason MIG stands up better for that kind of metal.
Also it will help it if you weld it as cool as you can,not burning it in.I learned from other welders showing me this stuff over years of working on trucks mostly.
What you say about undercut is true,but in this case 7018 is not so much undercutting as it is that the metal is stiff and something about the mixture makes it real hard with more heat and thats what makes it break easier.Thats what they told me and Ive seen it proved to me that was true.
Believe me its a pain to roll a big MIG around through a maze of air lines and broke down trucks to weld a 4 inch weld on something,but knowing it would last better than using the buzz box many times I have done it.Its a pain to weld with a MIG if you dont know how,and its also not easy to get where you need it,but everything on a truck that you can weld with it,its better to use a MIG on it,especially thinner metal.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
