Posted by moline_guy on November 11, 2009 at 04:55:35 from (66.231.24.111):
In Reply to: Tub Grinders posted by sparktrician on November 10, 2009 at 15:34:55:
We have run haybusters for years, dad currently has a H1100 model and we have run it with 100hp tractor, you just need to run the tub slower. With 250hp up front it will really eat hay, we have also cracked corn with it before. This one has a hydraulic governor and the newer ones have an electronic governor, if set right they wont overload the tractor unless you are trying to grind real wet hay. He paid 6000 for it about six years ago. He use to rent the neighbors H1000 and that one had an electornic governor and smaller grinding drum and workded fine with a 100hp tractor, just need to set the governor according to your tractor. Years ago we rented a Farmhand model 900B and that one has a smaller grinding drum and pulls much easier, it also is hydraulically governed. Have seen them sell for around 2000 in average condition and would probably be a good unit to have if you are only grinding small amounts and have less than a 100 hp tractor. The farmhand model we used was designed for the 80- 140 hp tractors, more than that and pieces start flying.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.