Posted by rvirgil_KS on October 26, 2009 at 18:11:05 from (70.184.229.45):
In Reply to: UB wiring 12v posted by ub pulling on October 26, 2009 at 17:51:00:
Originally 12 volt positive ground with generator.
1. You don't say how much it discharges on meter. You could polarize generator by momentarily jumpering from generator armature post to BAT terminal (wire to ammeter) on regulator. Touch the nut and not the threads on the armature so when it arcs it doesn't damage the threads. Polarize with tractor not running then see what it does when you start it up.
2. Ground field post on generator (tractor running). If it now charges you have a regulator or wiring problem.
3. If it still does not charge leave ground on field post. Jumper from armature on generator to "BAT" terminal on regulator. (wire going to ammeter). If it now charges suspect a cutout problem in the regulator or associated wiring. If it still does not charge suspect the generator.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.