Re: Char Lynn power steering motor on 77

Posted by gots-2-go on March 07, 2008 at 06:39:55 from (69.72.47.152):

In Reply to: Re: Char Lynn power steering motor on 77 posted by Mike 50 on March 07, 2008 at 00:19:27:

I am not sure of the tee in the line as mentioned in the above post, go to the Farmall Board and ask "Allan in NE" about the setup on his Farmall H.

He used a (priority valve???) in his setup to insure the power steering gets it supply of oil required before anything else does. He has some good pictures of it if needed.

I use the Behlen #201 Live Pumps on my tractors to supply the hyd oil for power steering. They are set to put out 3.25 gpm at 1000lbs of pressure. They mount between the dist or mag drive and the dist or mag now being used. If your tractor uses a dist or mag with a #2 flange coupling on it a Behlen pump may work for you.

There are two different kinds of #201 Pumps one is for clockwise rotation and the other is for counterclockwise.

Here ia a picture of one for a Farmall H or M:

One thing for sure from the above post is right about those steering motors either CharLynn or Behlen won't stand not much more than 1000lbs of hyd pressure, or they will bust apart.

I learned this the hard way and had to replace a steering motor.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]