Posted by the tractor vet on November 28, 2007 at 07:27:14 from (76.212.225.148):
In Reply to: more info posted by jerry thomas on November 28, 2007 at 04:54:32:
If you are having a problem with the cam and can not find a new one from Case I H and no GOOD used ones to be found , Then here is some food for thought , Sometimes if ya can find a good machine shop they can weld up the cam and regrind itOr one can start callen Cam companys and they may be able to regrind it back to spec.'s . Also you will need to either have the lifters either reground or replaced with new or it will wipe out the cam in short order .Myself i have never worked on a 284 and do not clam to be the guru on that I H tractor . When i was working on tractors everyday When i did a total rebuild i had the cams either rebuilt or replaced if they were woren . Then i would start looking into WHY it went bad . To soft lobes . wrong oil used valve set not with in spec.'s to stiff springs ????
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
