Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

more info

Welcome Guest, Log in or Register
Author 
jerry thomas

11-28-2007 04:54:32




Report to Moderator

i recently posted a message looking for a camshaft for a 284 tractor with a mazda engine. will any other camshaft fit this engine




[Log in to Reply]   [No Email]
the tractor vet

11-28-2007 07:27:14




Report to Moderator
 Re: more info in reply to jerry thomas, 11-28-2007 04:54:32  
If you are having a problem with the cam and can not find a new one from Case I H and no GOOD used ones to be found , Then here is some food for thought , Sometimes if ya can find a good machine shop they can weld up the cam and regrind itOr one can start callen Cam companys and they may be able to regrind it back to spec.'s . Also you will need to either have the lifters either reground or replaced with new or it will wipe out the cam in short order .Myself i have never worked on a 284 and do not clam to be the guru on that I H tractor . When i was working on tractors everyday When i did a total rebuild i had the cams either rebuilt or replaced if they were woren . Then i would start looking into WHY it went bad . To soft lobes . wrong oil used valve set not with in spec.'s to stiff springs ????

[Log in to Reply]  [No Email]
the tractor vet

11-28-2007 07:28:17




Report to Moderator
 Re: more info in reply to the tractor vet, 11-28-2007 07:27:14  
Wrong spot for this one sorry



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy