Posted by Ed65 on August 18, 2007 at 19:16:57 from (75.88.146.172):
Thank you for taking your time to help. I am looking for a used hydrolic pump drive for a 1966 JD400 backhoe. The part number is T22915T. The dimensions are: 4 and 3/16 in. long. The center point of the two hoses on the front part of the drive measures 2 and 3/4 inches. My problem is that I bought an after market part, but the part is too long and there is not enough room between the pump face and the engine drive. The after maket part has the correct part #, but it is at least 1/4 inch longer that he original part. I have called everywhere that I know of and I cannot find a used one. All I can find is the after markert part that is too long. Since the backhoe is so old, I thought I could find one fairly easily. I can't shave the front or the back end down to make it fit because it will make the unit too thin at both points. The pump size is 3.01 cu. inches. I would greatly appreciate any info. on where I may find a used one. John Deere wants over $200 for the part and the after market is $85. Thanks for your time. Ed
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.