Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Part for 1966 JD400 backhoe

Welcome Guest, Log in or Register
Author 
Ed65

08-18-2007 19:16:57




Report to Moderator

Thank you for taking your time to help. I am looking for a used hydrolic pump drive for a 1966 JD400 backhoe. The part number is T22915T. The dimensions are: 4 and 3/16 in. long. The center point of the two hoses on the front part of the drive measures 2 and 3/4 inches. My problem is that I bought an after market part, but the part is too long and there is not enough room between the pump face and the engine drive. The after maket part has the correct part #, but it is at least 1/4 inch longer that he original part. I have called everywhere that I know of and I cannot find a used one. All I can find is the after markert part that is too long. Since the backhoe is so old, I thought I could find one fairly easily. I can't shave the front or the back end down to make it fit because it will make the unit too thin at both points. The pump size is 3.01 cu. inches. I would greatly appreciate any info. on where I may find a used one. John Deere wants over $200 for the part and the after market is $85. Thanks for your time.
Ed

[Log in to Reply]   [No Email]
Dlm

08-19-2007 08:04:05




Report to Moderator
 Re: Part for 1966 JD400 backhoe in reply to Ed65, 08-18-2007 19:16:57  
Change it over to a newer style coulping. It will cost a little more but will be a lot better.
Don



[Log in to Reply]  [No Email]
Bob

08-19-2007 00:36:24




Report to Moderator
 Re: Part for 1966 JD400 backhoe in reply to Ed65, 08-18-2007 19:16:57  
How much do have invested in shipping for the WRONG part, and time wasted, piddling around?

If the genuine part DOES fit, it's a BARGAIN at $200.00, vs. an $85.00 part that DOESN'T fit, or a used part that's 1/2 or more worn out, itself!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy