Tractor Talk Discussion Board |
Re: What's the Difference Between Wico C and X Mag
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Glen in TX on January 09, 2007 at 10:06:41 from (208.246.9.138):
In Reply to: What's the Difference Between Wico C and X Magneto posted by Pat Graham on January 09, 2007 at 07:55:59:
The Wico C replaced the AP model and C was later replaced with the XH and XHD model in 1940s. The C had a steel tube in it with 2 bronze oil-lite bushings mounted in and early C mags had problems with the bushing coming loose in aluminum housing. It became more of a problem during WWII years when good aluminum was not available but many bad housings were replaced later by Wico in a replacement program with all later better housings have a 3 on upper side of housing to designate the later replacement. The replacement program was dropped when the Wico XH came out so not all got replaced then. Everything new is available again still for the C except the housing and magnet. The XH was later design with ball bearing and oil-lite bushing for the magnet shaft and XHD models had HD condenser, HD magnet, HD coil, & HD impulse parts for hotter spark. The Wico XH & XHD models are still being made new again today so all parts are available for them. XH was a simple design and that's why it's about the only new mag still made today for a reasonable price and adapted for most any SAE flange or base mount replacement application.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|