Tractor Talk Discussion Board |
Re: F10 loader leaking fluid
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Allan In NE on July 12, 2006 at 13:43:03 from (148.78.243.26):
In Reply to: F10 loader leaking fluid posted by fisherman on July 12, 2006 at 12:06:13:
Fish, Get two old 30 gal oil drums and stand 'em on end under the bucket. Pull the control out all the way so that all the weight is on the barrels. Take another barrel (or something) and lay it on it's side under the cylinder you are working on but back about 4 or 5 feet making sure the front end of the cylinder will be slightly higher than the rear. Pull the pin that holds the cylinder ram to the head and let that cylinder down on that third barrel. There is a retaining collar at the forward end of the cylinder and it is held on by a short 3/8" or 7/16" bolt. Take this collor loose and then just pull that ram out of the cylinder. On the back end of the ram you will see the leather and its reinforcement spring. Change out both cylinders' leathers, put 'er back together and your back in business. Hope this helps, Allan
Replies:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|