Tractor Talk Discussion Board |
case 580ck diesel cam timing?
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by jim maloney on July 14, 1999 at 08:59:55 from (207.24.213.3):
If I have No.1 cyl @ TDC on compression, can I unhook the cam gear, take off the rockers & spin the cam by hand & when I see both pushrods on No.1 cyl go down, then I would know that the cam is in the correct relationship to the crank? I put new rings in & the compression is lower now than w/ the old rings so I thought the valve train was out of time. Any help would be great.Thanks Jim Maloney
Follow Ups:
Post a Followup
|