Tractor Talk Discussion Board |
Re: AC D17 series IV
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Roger West on June 10, 2005 at 10:17:27 from (199.141.125.33):
In Reply to: AC D17 series IV posted by Roger West on June 09, 2005 at 13:51:20:
Thanks for your help. I call it a rod, but it could be called a bar. It seems to connect the snap coupler arms together, I guess, to be sure they lift the same time. The rod is 1/2 inch in diameter and about 2ft long. There is a hole that the bar fits through on each snap coupler, and then a bolt and nut secure it in place. I have used the 3pt hitch adaptor with the snap coupler and when use the bush hog, the adjustable arm that mounts to the 3pt bracket just below the seat, if raised to high, will hit this bar and will bend the arm if not careful. So I had thought about taking the bolts out of the bar and removing it totally when using the 3pt. Just wanted to be sure that I wasn"t tearing anything up. Thanks
Follow Ups:
Home
| Forums
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|