Tractor Talk Discussion Board |
Re: Ford 501 sickle mower
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by tlak on July 12, 2004 at 16:37:20 from (66.38.80.92):
In Reply to: Ford 501 sickle mower posted by JG on July 12, 2004 at 14:25:32:
A stick measures roughly 37:3/4L X 1:5/8T X 1:1/8W A Ford stick at NH cost about $11. They have a rivet through the tall side at the spring end. I drill the opposite end and put a 1/4" bolt to match the rivet because they seem to break out along the bolt line. I also started taping the stick with box tape because they appear to be boarder line weak. So far this season one stick. The person asking about the big curved arm toward the front that was cut off his. I believe all this was for is for the mower to lean on in storage. I have this on a salvage mower The person asking about the bearings for the flywheel side of the pitman. I have a salvage mower that I started to renovate and bought these bearings for it. Bought about $40 sell for $25+sh.
Follow Ups:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|