It is most likely your hoses will be high pressure two wire braid hose. It is common to take old hoses to a shop or parts store and have them copy the old one to make a new one. Some replacement hose ends have bends but those are generally 6" long or less.
Are the hose made with the tubing as part of the hose end fitting or is the hose connected to the tubing with a threaded fitting? If you have a hose with a longer tube made to the hose end fitting, you may need to have the old tubing cut off and either a compression or a weld/braze hose end fitting is used to attach old tube to the new hose. If you have damaged steel tubes running along a frame there are shops that can make them. If just a spot leaking sometimes they can be welded or brazed at that location to seal them. Often people replace the tubing with hoses.
Some pictures of what you need to replace could allow tailoring this to your needs better.
Your tractor is a 2200. Look for tags on the loader and backhoe to see if you can find out what models they are, which might allow looking at parts books for them.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
