Posted by andy r on June 11, 2023 at 17:42:31 from (208.126.193.44):
My Cub Cadet zero turn mower lost power. Engine is a Kawasaki FR651V twin cylinder 22 horsepower. Cleaned the carburetor, new fuel filter, new air cleaner, and new spark plugs with no improvement. This engine model has problems with coils, so I put a new coil on the dead cylinder with no improvement. Engine would not start with the other cylinder's spark plug wire removed. Switched the coils around with no change. Left cylinder always dead. Pulled the valve cover off on the dead cylinder side and a push rod feel out. Push rod was bent. Not a wonder it fell out of the rocker arm. Upon further examination the other push rod was bent as well. I attached a picture of the bent push rods. I guess this engine is known for excessive valve/rocker arm clearance. I subpose the excessive clearance let the push rod fall out or it was hammered into its bent shape. Anyone experience bent push rods on the Kawasaki engines? I really can't see how you would adjust the valve clearance. Any ideas appreciated. Thank you.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.