Posted by Robert_327 on March 30, 2021 at 06:40:11 from (165.225.60.217):
I used my WD45 Remote Hydraulics to pick up our grain drill and set it down to work on it for spring planting. The hydraulics worked as they should. I happened to change my Hydraulic oil on the WD45 as it was sitting there. I used the ISO68(20w) the WD45 manual called for. The Dipstick is reading the new hydraulic level at the Full mark. When I started the WD45 to move the tractor and drill it would not lift/extend the remote ram on the Drill. I can hear the pump but there is no pressure in the hose. The pins that hold the cylinder on the drill are not under pressure with the hydraulic hand lever in the down or up position. When I drained the Hydraulic reservoir the fluid that drained out was red almost like ATF. Also, before the change the pump always made a bit of a chatter sound when running the remote ram to extend. Now it is whisper quiet. The two rams for the lower link have always been capped off and no hoses since I bought the tractor a year ago.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
