Posted by Ultradog MN on January 24, 2020 at 14:12:52 from (172.58.86.190):
In Reply to: Ford one arm loader. posted by DeltaRed on January 24, 2020 at 08:48:01:
Ford one armed bandits take a bit of learning so you don't waste your dough. There were changes made to them over the years. Bunch of ifs, ands or buts to that too. Basically the loaders were the same but the side box changed from 5 1/2" which fit tractors from 48-64. And a 3 1/2" box that was used from 65-75. First photo shows measuring a 5 1/2" box. After 1975 not mountable because of hydraulic pump. 8N mounting kits are very uncommon. Different kit for NAAs - equally rare. Kits for the 55-64 tractors are all the same and fairly common. Except for the front bracket on the row crops are different and uncommon. The 'hip' bracket most important. Would be hard to duplicate. Bottom and front brackets could easily be torch cut. 65-75 3 cylinder brackets a little hard to find and some differences between early and late and 2/3000 and 4000 but 'findable'. A decent bandit with no brackets is worth maybe $150. Double that with all the brackets. Add another C note if it is the all hydraulic model and not the trip bucket. Dunno about the Dextas except they made brackets for those too. I got into them for a while. Had a few but none now. Still think one of them belongs in the Smithsonian institution as they are pretty cool. The original quick tatch. And if I had learned about stock trading instead of this stuff I would be wealthier. So there you go. :)
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
