I agree with MoMike. His dimensions are about right on. If the gear is at 12 foot already, I am guessing that someone had a 16 foot rack on it before. I would definitely shorten it up a bit but I don't think I would go as far as 8 ft. I would take it back to 10' and build a 14 ft bed on it. I would get your bed built and then shorten your tongue to the correct length you want. I know your worried about load on it because it's only rated for 5000 lbs but it will handle it. I have a Case gear that is rated for the same amount that I haul 100 bushels of corn on all the time and it has done that for almost 70 years without failing. The Case gears I have under my 16 foot racks are only rated for 7000 lbs and we put 8 round bales averaging 1400 each on it and I have never had one fail yet!! A 14 foot rack is a good size for your operation. It will easily haul 100 bales and still be pretty maneuverable Here is a pick of the last 16 footer I built.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.