Re: Allis WD Hydorlics

Posted by Ralphwd45 on March 06, 2013 at 21:07:51 from (66.243.214.142):

In Reply to: Allis WD Hydorlics posted by Russ5099 on March 06, 2013 at 15:36:37:

I wanted to hang a 3pt, with down pressure on my CA which uses the same 4 piston pump that the WD does. Remember that you are dealing with a 3000 psi system, and cylinders should be rated the same! I used 2 short double acting cylinders, on the 3 pt, and hooked my in hose from my control valve with float, to the pressure port. My out hose from the control valve runs under the rear end to the hydraulic resivour fill plug.I need to take some time, and redo this connection( needs a Tee there, so I can add Hi Yran when needed. It works ok but is slower due to smaller flow of oil, in pressure outlet at the pump. It is still NOT live hydraulics, except when using the hand clutch.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]