Posted by Texasmark1 on January 08, 2013 at 08:19:03 from (198.45.243.137):
In Reply to: Cummins turbo's posted by jon f mn on January 08, 2013 at 05:14:52:
Having run an 800 cu in 400 HP big cam Cummins turbo for awhile, before you plunk down $700 or so in today's money, ensure that the turbo is in fact the problem......BTDT and not only did I pay for the turbo, plus installation, I lost a days work having something fixed that wasn't broken.
The turbo is nothing but a shaft on bearings with a fan on either end inside a housing....with an external source of oil . About the only thing that can go wrong is to throw a blade or have a bearing wear out; both of which can be checked without removing the unit. You can eyeball both ends and check the blades and spin the shaft with your finger and check for shaft wobble or worn out bearing noises/friction/roughness in the rotation.
If the output "circuit", the high pressure air inlet to the engine intake manifold, has ANY cracks or openings of any kind, the pressurized air will blow out through the opening and whistle. The configuration and size of the opening determines just what kind of noise it makes.
Take something like a small feather or anything that can detect air flow and go over all the piping joints and the manifold gaskets and see if you can find a leak. Or you might wait till the engine is cool and with a bottle of soapy water and the engine idling, run over the joints with that.
On my experience, after the fact the whistle was still there and I found a small pin hole in the pipe that was the cause. I can't recall what arrangement I made with the repair facility owing to the fact that since the turbo wasn't the problem they should have removed it and put mine back.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
