Posted by Shealray on June 08, 2012 at 14:48:51 from (67.142.178.25):
Workmaster was running fine after 3 hours straight for cutting hay I started having issues
The tractor would sputter and power would drop. First I thought it was over heating because I have a front end loader and maybe this was blocking air for cooling. Next day the workmaster only ran 1 ½ hours and did the sputtering thing and power would drop. Luckily the cutting was done and we thought OK heat over load. We let it set for 2 hours and tried to rake this time the little tractor would start and then just die. We checked the ground for pushbutton wire and tightened and the tractor would start and die. We are not getting a spark. There is fuel. So now we need some help in trouble shooting. Now the push button will not start the tractor. We reseated the wires to the push button and it started once and died and now the push button will not start. I know all the push button is doing is grounding. So we tried taking the wire off the push button and touching metal to ground for starting this did nothing. Is it the solenoid, pushbutton switch or heat? How do we test to see which one it is?
Thanks for the help
This post was edited by Shealray at 14:54:52 06/08/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.