Posted by povertyknob on December 04, 2014 at 18:14:53 from (208.126.27.201):
In Reply to: 1955 300U steering slop posted by PretendFarmer on December 01, 2014 at 17:20:14:
Well if you know its not the spindles on the axle and your drag link arms are tight on there steering shafts.... Its in the box,most likely one of the sector shaft gears has broken a tooth,it is very common on these utilities,it happened to mine twice over the 15 years I've had it... You mentioned the right side is steering ok and seems tight? I know on the hydraulic version of that box the right side is the "master" of the 2.. the right sector shaft is the one that meshes with that silly worm/cam... like I said before those sector gears get broke pretty easy,I've broke them mowing tall weeds and getting a front wheel into a corner post,you won't know anything till you do some more looking,if the gears are broke find a good machinist/machine shop thats what I did.. those steering boxes are hard to find..
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.