Posted by Dave H (MI) on August 19, 2014 at 13:15:54 from (50.108.117.135):
In Reply to: Sickle bar mower posted by Jerf on August 19, 2014 at 11:06:36:
Going on the basis of pictures I find online, if your mower has the quick attach arms you can fabricate a bracket using round and flat stock and bolt it to your horseshoe drawbar. I did this with a #5 that had a similar hookup. This extends the mower back a little further and may require you to have PTO shaft made that is a little longer than stock. It also adds extra stress to the drawbar so take a pass on the "one brake" fast turns or you will blow out a draw bar strut...don't ask. Another option, as it appears to be a semi mount from the picture is to bolt the mower onto the draw bar. Based on what I know of JD mowers, and I used them a lot of years, if you scare up a manual it will have diagrams of mounting to many different brands of tractors. HTH
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.