Posted by mike1972chev on July 16, 2014 at 07:59:21 from (209.149.164.254):
Belt pulley had always felt like it had a "rough" bearing in it since I originally bought the tractor. (NO big deal since I never use it anyway.) Flash fore ward 14 years and now after just driving the tractor ,it is leaking gear grease around the outer seal on the belt pullet shaft.(Hasn't been used in 14+ years I can account for. ;)
Like I said,I doubt if I would ever be flat belting ANYTHING EVER,but I at least need to tend to the new leak. Is it a matter of pulling the entire gear box off and just going ahead with a total rebuild ,or am I able to able to undo those outer 3 bolts and pull that outer assembly out and re bearing and seal it with out removing the entire gear box,or would that just be doing a "half a$$ed" rebuild job???(Never redone one,and have NO manual in front of me to know what is going on at this point.)
I know I could just do the belt PTO delete plate,but if it isn't to much of a task,I might as well just redo the thing.
Thoughts,opinions???? Pointers,tips on rebuilding???
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.