Posted by Jeff Pfeiffer on July 01, 2014 at 06:22:02 from (69.95.13.99):
I have a 1950 H which seems to have a mix of original and newer wiring. The generator is a Delco-Remy 1101355 and the cut-off relay is a Delco-Remy 1116766. It's still wired for 6V, uses a positive ground and has a magneto.
Since I'm not ready for a restoration (that's in the future sometime), I'm considering a simple re-wire job just to get the electrical system back up and running.
When I compare the tractor's current wiring to the generator and cut-off relay, it doesn't seem to match what I'm seeing published.
It's a little tough, from the pictures, you can see that the 2 wires coming from the electrical box are landed on the F terminal of the generator and BAT of the cut-off relay. There is also a wire from the A terminal to the GEN terminal. BUT, there's also a wire from the F terminal on the generator to the F terminal of the cut-off. Why? Remove this?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.