Re: Farmall a surge

Posted by Janicholson on April 27, 2014 at 12:52:38 from (199.17.6.78):

In Reply to: Farmall a surge posted by Mrnepa on April 26, 2014 at 13:06:30:

The most likely cause is binding linkage. With it not running, make sure the throttle shaft in the carb and the linkage back to the governor arm at the front is free to move in both directions when the hand lever is moved through its range. If it sticks at all, it must be freed up. The governor opens the throttle against the governor spring. the weights inside try to close the throttle plate. With this in mind, finding the binding, or improperly adjusted part is next. If the throttle hand lever is fully to the fast position, the throttle plate at the carb should be fully open, and the linkage from the governor arm at the front to the throttle shaft lever should be just long enough to assure the throttle stays open (all done with it OFF! Jim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]