Posted by fixerupper on April 07, 2014 at 18:43:27 from (100.42.82.100):
A few days ago I made a post mentioning I couldn't get the 1086 into park sometimes. Today I found the problem and it was so simple I could kick myself. The rollers for the reverse-park shift lever in the shifting console in the cab needed a shot of oil. I pulled the shifter into reverse, stuck the oil can tube down through the shift lever slot towards the rollers and gave them a few squirts. Now it shifts into park and reverse with practically no resistance. All last winter I was grumbling to myself about how hard it was to pull into reverse, and this being a loader tractor , reverse is used a lot. I could have saved myself a lot of hard tugging on the lever if I would have done this a year ago Sheesh! So you 86 series owners, get out the squirt can if it's going into reverse and park a little harder than you think it should. Jim
This post was edited by fixerupper at 18:45:34 04/07/14.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.