Posted by Bryce Frazier on April 07, 2014 at 15:50:31 from (67.142.182.21):
Hi all it's Bryce. I have been discussing the possibility of pulling a 2 x 14 plow at our local plow day, and some of the guys that have answered have mixed emotions about it! :)
I would like some cold, hard, facts, will it do it or not?
Here is what I know:
Soil: 80% dry, mostly sandy loam, hay field, has been plowed in a few years...
Tractor:
22 Horse on the Draw Bar (has the Super C engine)
NO fluid in tires
2x Weights on each rear tire
Wide front (not sure if that matters???)
HAS tried to pull a broken 2 x 14 plow before, and it really gave it a LOT of troubles, but it did do it for a pass or two.
Plows:
I have one of two options, make the depth control rod for my C-294 Belly Mount plow and hook it up.
Pull and Case Centennial 2 x 14 plow, on rubber.
I have been trying to get the part made for a couple of months after I realized that I was missing it, but I still don't have any actual dimensions as to what it SHOULD be....
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
