Posted by Al L. in Wisc. on January 23, 2014 at 11:00:42 from (216.226.92.254):
Here is a photo of a fast hitch filler plate. Thought I would post this as once in a while someone asks about same. My Farmall 340 Parts Catalog shows it as part number 523 387 R11 and the drawing is on a straight piece of metal. The catalog lists both 2" and 2 1/4" roll pins for use with the plate to hold it in the socket.
As an example, the steel insert enables the use of small-point implements from a Farmall 200 on a Farmall 340; a tractor with large sockets.
The plate is made from 1/2" steel and measures 13 3/8" long; 1 1/8" wide. The cross of the 'T' is 3/4" long X 2" wide. Two 1/4" diameter holes are drilled through the steel. Centered 2 1/4" from the end (width-wise with awl extending through in photo) is on the edge and the second hole is centered 10 1/2" from the same end, on the face.
I 'tink' I found mine lying in the area below the seat assembly on one of the Farmall 340's.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.