Posted by Dean Olson on January 11, 2014 at 19:42:38 from (107.129.21.153):
In Reply to: 300 heavy FH points? posted by Lucid on January 11, 2014 at 12:28:47:
My Super C's have the small points and my 300 has the large. I had a 240 with small points back in the day.
It's easy to use small point implements on a large point fast hitch with spacers. This is practical for most implements. While my 300 would certainly pull my 2-14" C20 plow it would be hard to get the wheels spaced correctly.
My 7' disc designed for the super c works great behind the 300, 2nd pic. This is overkill because that disc works equally as well behind the Super C. My blade designed for the SC works far better on the 300 due to the down pressure and a much heavier tractor.
1st picture shows my 300 pulling an 8' spring tooth cultivator designed for my SC. I had to run a couple miles over to buddies place and the road gear in the 300 was nice.
You could cut down large points to use on small point fast hitch but I can't think of very many practical applications. I wouldn't cut down my 3-14" plow or 8' disc harrow to work on my Super C.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.