(800) 853-2651
SHOP NOW

300 heavy FH points?

I believe the 300 is the first to have the heavier points. I think below that it was the smaller version. Not going to swear on anything but that is my understanding.
 
You can shim small to large and you can cut down large to small(plasma cutter works best)
 
My Super C's have the small points and my 300 has the large. I had
a 240 with small points back in the day.

It's easy to use small point implements on a large point fast hitch
with spacers. This is practical for most implements. While my 300
would certainly pull my 2-14" C20 plow it would be hard to get the
wheels spaced correctly.

My 7' disc designed for the super c works great behind the 300, 2nd
pic. This is overkill because that disc works equally as well behind
the Super C. My blade designed for the SC works far better on the
300 due to the down pressure and a much heavier tractor.

1st picture shows my 300 pulling an 8' spring tooth cultivator
designed for my SC. I had to run a couple miles over to buddies
place and the road gear in the 300 was nice.

You could cut down large points to use on small point fast hitch but
I can't think of very many practical applications. I wouldn't cut
down my 3-14" plow or 8' disc harrow to work on my Super C.
a141424.jpg

a141426.jpg
 
My dad's 350 had large points. The 300 utility and the 450 both had large. Bought a rotary brush hog type mower and always had to use the spacer bars on it.
 
I have an 8ft fast hitch blade with wide points and my 300 handles it easy. I also have a fast hitch 2 bottom plow with the smaller points that hook up nicely to my super c fast hitch. I use the plowed shimmed for the 300 but would not consider altering the wide point blade, albeit would not be a big chore.
 
You must log in or register to reply here.

Similar threads

A
IH 140 antifreeze, oil, oil filter, plugs, points, hyd fluid
Replies
4
Views
258
BarnyardEngineering
BarnyardEngineering
K
Which fast hitch?
Replies
5
Views
515
Jim Becker
J
R
6-12 volt update points conversion?
Replies
17
Views
585
Janicholson
Janicholson
G
Industrial 350 utility
Replies
1
Views
146
Janicholson
Janicholson
H
Melroe grain manual ??
Replies
0
Views
142
herk
H
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top