Posted by JudeOnt on January 11, 2014 at 01:17:54 from (74.12.235.155):
Work on this is progressing well I think..
I started in the shop in shed.. but before christmas we moved it to a smaller shop that we use for the motorcycles. Had to take the lift out, also had to take the weights of rears to fit thro the door. But lots of light, woodstove and "snack fridge".
The recent deep freeze that we experienced slowed things up a bit with other obligations, like plowing snow.
anyway.. have the aircleaner soaked and clean, carb cleaned ready for kit, valve cover gasket removed and surface cleaned ready for new one, manifold loosed .. it needs to be replaced.. a couple of holes on the intake side. New oil petck.. to install, and gasket on pan to do.. wiring will get replaced. Probably need to get a new battery as this one has a weak cell.
Yesterday I to0k off the grill, fanshroud and rad.. the rad was the reason we parked it 4-5 yrs ago.. so will get replaced. Wish I had got this started earlier last fall so that it could have got hotwater p.washed, would have eliminated a lot of hand cleaning. oh well..
My plan is to get this running and tuned very well, then address any other necessary fixes or adjustments, work it for the summer and then next winter take care of the cosmetics.
This will give me a chance to see any leaks, and problems when it is running/working. After all nothing shows up sitting in the shed.
I now have a couple of 'old fellas" ( Iam over 60) that come over to see how things are going. They even bring the 'snack' sometimes. But the interest is good and they have lots of time on their hands, and the stories are great.
thanks to all who posted on my other qestions. This site is very helpful.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
