Posted by boggie on September 27, 2013 at 20:10:39 from (198.47.51.235):
In Reply to: 300 sheetmetaal posted by farmall4856 on September 27, 2013 at 04:09:48:
Quoting Removed, click Modern View to see
I worked in a body shop for 45 years so i have done a lot of painting. If you are tring to paint c/c over enamel this will happen. Sand back down - use a 2 part primer [ one with a hardner] 2 coats - sand with 320 paper - paint to cover with base coat color. [requires no hardner] - apply 2 coats of c/c [requires hardner]. you can let the primer set as long as you want, [once you sand it paint it] let base coat dry about 1hr. then c/c. do not let base coat set over night without c/c ing as it will peal off in the future. Do not paint if it is real cold as the paint will be runing all over. Make sure parts are degreesed before you start sanding down. Take your time between coats to let tack up. Good Luck --- Boggie
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Smells - by Curtis Von Fange. We are continuing our series on learning to talk the language of our tractor. Since we can’t actually talk to our tractors, though some of the older sect of farmers might disagree, we use our five physical senses to observe and construe what our iron age friends are trying to tell us. We have already talked about some of the colors the unit might leave as clues to its well-being. Now we are going to use our noses to diagnose particular smells. ELECTRICAL SMELLS
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.