We are lucky CaseIH has made the things that are online available. Evidently they have chosen to reserve any general parts lookup capabilities for the dealers. Not to speak for them, but is a capability their normal customer base rarely needs. The dealers can go online to look up parts numbers, but it isn't the sort of thing that usually generates sales. So don't expect anyone to do it for you unless you have a good friend on the other side of the counter.
There is a huge amount of data that is stored and has to be accessed to find where a part number is used (may be part of the reason they don't give public access). Even back in the mid-'90s, the CaseIH where used took over 100 pages of microfiche. I can't imagine how many feet of books it would take. This was AG only, no truck etc. numbers.
For most people, posting it here is probably the best (maybe only) way to get a part IDed. Somebody may recognize a part and be able to tell you, with or without a part number. At the least, somebody may be able to identify the type machine. For example, if somebody says it looks like a planter part, you might be able to find it by checking 3 or 4 planter books. Face it, if you aren't willing to check 3 or 4 books, you don't want to know that badly. If you post here, don't withhold information. Tell us everything you do know. Here are some tips on getting help:
- Post a picture, include something in the photo so people know what size it is (like a 12-inch ruler!).
- Include the part number, even a partial of the first few digits may help. Be sure to include the letters. 12345D and 12345R1 are different parts!
- Tell us about guilt by association. "It was in a box of grain drill parts." says a lot more than "It was in a box of parts." It may not be a related part, but if it is it may help someone ID it.
- Finally, just be civil and just ask your question. If you start with a long gripe about what you can or can't find online, of how a guy at the dealer blew you off, other people are likely to blow you off too then go read somebody else's post. After all, looking up a part number requires some effort. Don't annoy people when you are asking for a favor.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Ford N-Series Transmission/Hydraulic Fluid - The Full Story - by Llamas. The transmission fluid in an “N”:-series tractor lubricates the transmission, differential, rear wheel bearings, PTO and hydraulic pump drive, and it also cats as the working fluid for the hydraulic lift. In 9N/2N models, it also lubricates the steering sector and shaft system. The owner’s manual for the 9N and 2N models specified the use of only two fluids. They were STRAIGHT MINERAL OIL SAE 90 (above freezing) and
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
