Posted by south_ms on June 14, 2012 at 20:34:52 from (98.95.125.92):
Thank you to all who helped and chipped in with precious information regarding my new old tractor. I now know it is an International Harvester 484 with Perkins engine and Bosch pump.
I changed the old fuel and drained the filter and managed to crank it up using ether. It fired up and ran, didn't have any knocking or whining, idled around 650 and could go up to 2000+ however it was blowing a cluds of really strong fuel-smelling exhaust, so strong that it actually burned the back of my throat and my eyes when I stood on the ground.
I know it isn't a burning oil smell so I suspect it is either out of timing or something is up with injectors or the pump.
I already ordered a repair manual for it and it is suppose to be here next week(Can't wait!) in the mean time I wanted to pick your brains for some precious info and see if you guys can point me in the right direction with troubleshooting.
The tractor had two fuel filters which originally were plumbed in series but it was changed by previous owner where he fed the pump via single filter straight from tank. Also the original tank has rusted through so the tractor now has a boat tank strapped to the back.
Also return line from injectors was plumbed back to the supply line using a "T". I tried to take the return line off that "T" and feed it in to the coke bottle but it didn't change a thing. The fuel was barely coming out of return line
When I loosened up supply line from injectors so some fuel would escape the engine seemed to clear up some and produced less smoke - that's why I suspect it gets too much fuel.
Please advise on what would be a first thing to check.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
