Posted by Jeff Wenner on May 31, 2012 at 19:28:19 from (74.212.6.40):
Friend of mine has a 4 row 56 planter that he plants about 2 acres of corn with every year. He never seems to get a good stand. He always blames it on poor ground, bad seed, no good depth control, etc... Never paid much attention to it but I took a look at the planter tonight and it looks like a pretty decent design. Mostly gear and shaft driven, which in my mind eliminates a lot of places for things to go wrong. I took a look at his fields and it looks like it's going to be another bad year for him. A LOT of 3 to 4 foot skips in the rows. We dug around and couldn't find any seed so it is definitely skipping. There was even one spot where all 4 rows shut off for about 10 ft. That one I guess would have to be something sticking in the mechanism that puts things in gear when the planter is lowered. I recommended taking apart all the clutches and ratchets in the driveline and cleaning out all the old grease and checking them for wear. That might explain the whole planter shutting off, but how could the individual units be skipping erratically when they are all gear driven off the same shaft? He did use the correct plates for the seed. I've never had problems like this with my old Allis 600 or Ford 309. Any ideas what we should be looking at to get this thing planting like it should? Thanks
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.