Posted by Owen Aaland on May 24, 2012 at 13:14:51 from (216.47.35.138):
In Reply to: 300 making noise posted by old on May 24, 2012 at 12:32:17:
Quoting Removed, click Modern View to see
To check noises with clutch bearings, with the pedal released the bearing should not be touching the release levers on the pressure plate and will not be turning so there will be no noise. As you start to press down on the clutch pedal when the bearing starts to touch the release levers the bearing will start to spin and any noise should start then. If you continue to press down on the clutch pedal until the clutch disk is released the pilot bearing will begin to spin as the disk slows down. By listening to when any noise starts you can determine which bearing is making the noise.
In your case the noise happens when the clutch is totally released so if you have the correct free travel in the clutch adjustment the noise is not in the clutch.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.