Farmall & IHC Tractors Discussion Board |
The Super A started - need help now!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by BIG on September 25, 2000 at 07:19:19 from (63.25.119.31):
The Super A I have been working apparently had a faulty magneto. Put an old spare on it and it cranked and runs but needs a carb rebuild and needs to be timed. How, specifically, do you time it? I see that the magneto "pivots" from a bolt at its bottom and the adjustment is at the top. what procedures do I need to take to set it? Is it best done by loosening these 2 bolts just enough that you can turn the magneto by hand then crank the tractor and adjust by ear while it's running or what? Thanks for the suggestions. Also I need a carb kit to fit it, if anyone has one or knows a good place to get one let me know. It has a Zenith carb with the following numbers on it: 352377R91 and 10522. The tractor is serial #260001.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|