Posted by Roger Tomfohrde on April 19, 2012 at 07:45:42 from (204.77.51.68):
OK so I decided to part out the first 560 and use parts on a second one I bought. Most of my problems are simple change this or do that but I have run into something that may be related. I changed the oil pan gasket thinking that was where it was leaking, wrong. Owen A. suggested taking off the inspection plate by the rear of the pan and seeing where it is coming from. I let it run at an idle for awhile and didn't find any thing. Drove it around and then it started to leak a slow drip from both under the one edge of the crank and also by the seam of the block where the opening is. Now the related part, I have been trying to adjust the clutch the TA and it seems like it bottoms out before releasing. The linkage for the handle and the short linkage are both to the extreme in shortness and when pulled or stepped on to the end of travel, you feel almost a grinding feeling in the lever/handle.The tractor is not releasing so it will roll backwards down a slope with the clutch in, or TA pulled, but yet if the handle is pulled the TA works when moving and does not slip. Is it possible the engine thrust bearing is worn letting the clutch move the crank in when I step on it and then it leaks oil at the same time? I pulled the plate over the TA clutch and didn't find anything that looked wrong and I know the bearing looks good and is not touching the fingers of the clutch when released.I am confused.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
