Posted by Mike1972chev on March 20, 2012 at 09:27:01 from (75.149.81.173):
Hey,
I have asked this last year,but I am going to again.lol
I am getting ready to dis assemble my #37 disk.Basically I am going to just pull the gangs off of it and send the top part of the chassis to the sandblaster.(I do not see ANY reason to waste sandblasting on the disc and the spacer spools?????)
My disc originally AND STILL has 16" diameter disc on it.ALOT of them are broken/busted(About 10 of them!)The ones on it right now ARE NOT the HEAVY ones made by Case/IH.They are 11 gauge I believe? I CANNOT afford to put all new IH brand cutters on it. Are their any aftermarket ones that are heavier ?? Is there a better brand that is still inexpensive??? I thought of just putting new ones on the front row only,and then put the best of the remainders on the rear row.
What is the square shaft size supposed to be for a #37??? (as I am writing this,I am nowhere NEAR the disk to measure it myself.)
I also know using lighter gauge/thinner disc wiil cause me to have to run a thicker washer under the nut that tightens them all on the bar.
BTW,this disk WILL NOT be seeing alot of "full time" use. Just "hobby farming"!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
