Posted by John T on December 11, 2011 at 10:19:31 from (173.243.181.15):
In Reply to: Super C coil issues. posted by Agricon on December 11, 2011 at 09:13:36:
If you were to put a test lamp on the coils input (NOT to distributor) terminal (other test lamp lead to frame ground) and turn on the ignition, THE LIGHT SHOULD LIGHT AS VOLTAGE SHOULD BE PRESENT
HOWEVER if the tractor is just setting there not running with ignition ON and you put the lamp over on the output to distributor terminal ID EXPECT IT TO BE OFF SINCE THE POINTS ARE LIKELY CLOSED THEN.....(if alls wired up correctly and the points are working good and closed)
If you turn her on and crank her over a test lamp on the coils output or distibutor input (from coil) terminal should flash ON (points open) and OFF (points closed)
Heres my Ignition troubleshooting procedure, give it a try
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.