Posted by Tom Fleming on December 07, 2011 at 03:34:32 from (206.193.250.146):
In Reply to: Super A leak posted by David Lampman on December 06, 2011 at 08:42:44:
Barsleak is fine in a thermosyphon system IF it used right. Pretty simple, add the Barsleak and run the tractor up to temp, and keep it there for 30-40 mins. The circulation is fine when up to temp.
Also, the new formulation of Barsleak does NOT have the pellets like the old stuff. Barsleak is a unique polymer that reacts to being saturated. They shrink when wet, and when they hit air, they expand like blood clotting. Barsleak was developed during WWII for the US Navy to seal minor leaks on submarines. The stuff works when used properly AND it will not plug cooling systems IF used properly. Like anything else, when not used according to directions, it will produce undesirable results.
I have used barsleak on many thermosyphon systems, mostly when the drain plugs won't seal or there are minor leaks in the radiator. Works fine.
If you pour too many bottles in, and you don't run the engine up to temp, the old formulation will plug even cooling systems with water pumps on them.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.