Posted by The tractor vet on October 21, 2011 at 13:55:06 from (75.19.123.11):
In Reply to: 86 series cab posted by Jim Smaglinski on October 21, 2011 at 13:16:28:
Can it be done ????? Yea it can but it will not be a easy drop on deal. Have we done it yes more or less. we took a cab off a 1086 that got rolled over backwards in a silage bunker and replaced it with a take off from a bone yard . we had what was left of the old cab setting outside and my buddy was just starting to work on his 1066 puller at the time . Well after hours while we were indulging in some barley pop he said that he would like something really different then just a nother 1066 , i said ok how about we make it a 1086 . well with in a half hour the dash support fuel tank were off the 1066 and the torches were outside cutting the top half off the junk cab . So now we had and open station and the next step was to hang it over the 1066 chassie . Now the 1-066 does not have all the mounting points like the 86 does so here we had to build mountings by midnight it was setting on the 1066 Then came the hooking up of shifters and bending lines. Would i want farm with it no but for a 300 foot ride it was ok.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
