Jim Smaglinski
New User
Can a 86 series cab be put on a 1066
- Thread starter Jim Smaglinski
- Start date
Like with a Deere Sound Guard Cab on a 4020 it can be done if you are willing to spend enough money. Should be less things to relocate but I liked the functionality of the 86 series cab so I guess if I were doing it I would move the shifters for the transmission. I think I would incorporate the 86 series hydraulic levers, too.
It would be interesting to see if somebody worked all the 86 series controls onto a 66 series tractor.
It would be interesting to see if somebody worked all the 86 series controls onto a 66 series tractor.
the tractor vet
Well-known Member
Can it be done ????? Yea it can but it will not be a easy drop on deal. Have we done it yes more or less. we took a cab off a 1086 that got rolled over backwards in a silage bunker and replaced it with a take off from a bone yard . we had what was left of the old cab setting outside and my buddy was just starting to work on his 1066 puller at the time . Well after hours while we were indulging in some barley pop he said that he would like something really different then just a nother 1066 , i said ok how about we make it a 1086 . well with in a half hour the dash support fuel tank were off the 1066 and the torches were outside cutting the top half off the junk cab . So now we had and open station and the next step was to hang it over the 1066 chassie . Now the 1-066 does not have all the mounting points like the 86 does so here we had to build mountings by midnight it was setting on the 1066 Then came the hooking up of shifters and bending lines. Would i want farm with it no but for a 300 foot ride it was ok.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy