Posted by Andrew Z on October 14, 2011 at 05:53:19 from (72.10.122.33):
In Reply to: Re: H axle seals posted by David G on October 14, 2011 at 05:37:44:
changing the bull pionion seals is far more complex then changing the axle seals. There are a couple of ways to do it but the 'correct' way is to remove the top cover or the pto to gain acess to the bull grears, remove the bolts on the axle ends and pull the axles out. ( you can do the seals on them now as well) There are 4 bolts that hold the bearing cage in there. With these removed you will be able to pull the bearing cage out and change the seal. I would really get a manual before you get into that job. Not a super hard job but not a walk in the park. The other way to do it is to try and pick and pry the seal out with hooks and such, i have never done them this way just have heard it talked about. Im sure there are lots of post in the archives on here about this, the M is pretty much the same set up as well you can reference them as well. Supers and beyond are diffrent.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.